电蒸汽锅炉发作器装备上无挪动部件，操作起来安全和牢靠。 那么它的操作规程是怎样的呢？
1、打开电蒸汽锅炉http://www.jnshengxin.cn/自来水阀门，打开总电源，并且打开电蒸汽锅炉发生器电源。
Open electric steam boiler water valve, open the main power and turn on the power generator, electric steam boilers.
2、对电蒸汽锅炉排污时选择在当天设备用完之后，关闭蒸汽发生器电源，这时，蒸汽发生器的压力会慢慢下降，当下降到0.2.Mpa时，打开蒸汽发生器后方的排污阀门，利用该压力将蒸汽发生器内的污垢冲出。打开阀门后，等十秒钟即可关掉。排污时间过长，会使蒸汽发生器中的水全部排掉，导致电热管太暴露，影响电热管的使用寿命。
Select the day after the device runs out, turn off the steam generator power, this time, the pressure of the steam generator will slowly decline, down to the moment when 0.2.Mpa, open the steam generator blowdown valve at the rear of the electric steam boiler blowdown, With this pressure the dirt out of the steam generator. After opening the valve, and more than 10 seconds off. Discharge time is too long, the steam generator will drain all the water, resulting in too exposed heating pipes, affecting the life of electric heating.
3、电蒸汽锅炉http://www.jnshengxin.cn/排污过后在一个小时内绝对不可打开电源，每天使用完毕必须关闭设备电源、总电源、自来水。
Electric steam boilers within one hour after the sewage must not turn on the power, a day after use must turn off the power, total power, water.
